so after me being just totally fed up with my toe's situation, I soaked it in *hot* water & epsom salts for about 30 minutes, then started trying to figure out how to remove it. It was pretty gruesome, but I got it out, thank god.
the question is though wether or not it will come back... wait a month and see
Wednesday, April 23, 2008
so uhm, dang.
Unfortunately the ingrown toenail I had on my right big toe is recurring, and I'm 70% sure that I'm going to have to go to the doctor again and have it removed. However, I wonder, if again four months later it will come back? I'd rather not have big toenails because of this, despite the whole "toe protection" factor.
Money isn't a problem for the doctors thing, it's covered under insurance. The problem is that I have to get THREE shots totaling thirty cubit centimeters of numbing fluid in there. It's not fun and makes you really really queasy, I'd rather just get gassed and wake up when it's done. Much faster.
One nice thing, though, is that unlike the first time, it doesn't hurt constantly. No, this time it's fine, UNLESS it gets hit/pushed on, then it hurts like wow. There's also a bit of puss drainage, and when I try and open it (with tweezers) it hurts too much to let it drain more. Ungh.
Money isn't a problem for the doctors thing, it's covered under insurance. The problem is that I have to get THREE shots totaling thirty cubit centimeters of numbing fluid in there. It's not fun and makes you really really queasy, I'd rather just get gassed and wake up when it's done. Much faster.
One nice thing, though, is that unlike the first time, it doesn't hurt constantly. No, this time it's fine, UNLESS it gets hit/pushed on, then it hurts like wow. There's also a bit of puss drainage, and when I try and open it (with tweezers) it hurts too much to let it drain more. Ungh.
Tuesday, April 22, 2008
updates!
Woo, I got debian fully installed and servering on my network. Instead of moving the poweredge downstairs to the dining room, I thought it would benefit more being up here because it can be on the gig-e switch with the R61i, and it's much easier for me to access, so I can keep it maintained much better.
It has 4 HDDs in it, like I said earlier, three 80s and a 40, and one of the 80s is apparently on its way out, so I need to get a replacement on that soon. They're all shared over samba and are fully accessible over the network. I can also get to my home partition via netatalk.
This also opens the GX1 up to new horizions, which I'm working on now.
It has 4 HDDs in it, like I said earlier, three 80s and a 40, and one of the 80s is apparently on its way out, so I need to get a replacement on that soon. They're all shared over samba and are fully accessible over the network. I can also get to my home partition via netatalk.
This also opens the GX1 up to new horizions, which I'm working on now.
Monday, April 21, 2008
new toys
On the way back from Hannah & Maffew's yesterday we stopped by lando's house and picked up some goodides: a dell poweredge SC420 serverbox and a Sun Ultra5 with kb/mouse. I also got to take the D50 from hannah until she comes back in may, which is awesome.
The Dell is a pretty standard low end dell server, it has a 2.53GHz celeron which I guess is either equilivent to the lower end of a PIV or an early Core Duo, not really sure. It has 768MB RAM in three ECC DDR2 DIMMs (it can apparently take non-ECC too, so I can put lotsa cheap RAM in it) but is only supposed to have 512MB, an interesting story here: sometime when Lando had it one stick started spewing ECC errors, so he called up dell and within a matter of moments they overnighted him a new stick. When he put the new one in he reseated the old one, and boom, that fixed the problem.
It has 80 and 40GB sata HDDs, which makes it my first non-R61i to have sata onboard. I was told by Lando several times that the 80GB, which is a maxtor, the 40 is a seagate, was totally dead and that it was the last maxtor he had to die on him (as in all his maxtors are dead now) though... when I got it home last night and installed debian on it, the 80 formatted right up and I've been dumping several GBs of data on it crazily as of recent... and it's holding up fine. S.M.A.R.T. status also checks out fine, so I dunno.
This, btw, is replacing my current Dell server which is a GX1 with two 80GB HDDs in it. The GX1 is getting old and slow (500MHz PIII) and the fan in the power supply is starting to rattle, making it annoying. Hopefully I can put both 80GB IDE drives in the poweredge for 80+80+80+40 type storage. Won't be able to use the CD drive, though, as it only has one IDE bus. Eventually I'll get a 500GB sata when the prices go under $60, which seems to be soon.
The sun ultra5 is just something lando was getting rid of, and I offered to take off his hands. It's got a 400MHz ultrasparc processor, 768MB RAM (huge RAM, so huge the floppy drive doesn't fit in it) a 60GB IDE hard drive, and a generic IDE CD drive. Not sure what I'm going to do with it, but I have a keyboard and mouse so I can potentially use it as a full on workstation, probably with netbsd or sol.
Right now I'm installing OS9 on my powerbook pismo that I liberated from hannah and pondering food. The poweredge looks like it's almost done copying the first flood of data. Sweet.
The Dell is a pretty standard low end dell server, it has a 2.53GHz celeron which I guess is either equilivent to the lower end of a PIV or an early Core Duo, not really sure. It has 768MB RAM in three ECC DDR2 DIMMs (it can apparently take non-ECC too, so I can put lotsa cheap RAM in it) but is only supposed to have 512MB, an interesting story here: sometime when Lando had it one stick started spewing ECC errors, so he called up dell and within a matter of moments they overnighted him a new stick. When he put the new one in he reseated the old one, and boom, that fixed the problem.
It has 80 and 40GB sata HDDs, which makes it my first non-R61i to have sata onboard. I was told by Lando several times that the 80GB, which is a maxtor, the 40 is a seagate, was totally dead and that it was the last maxtor he had to die on him (as in all his maxtors are dead now) though... when I got it home last night and installed debian on it, the 80 formatted right up and I've been dumping several GBs of data on it crazily as of recent... and it's holding up fine. S.M.A.R.T. status also checks out fine, so I dunno.
This, btw, is replacing my current Dell server which is a GX1 with two 80GB HDDs in it. The GX1 is getting old and slow (500MHz PIII) and the fan in the power supply is starting to rattle, making it annoying. Hopefully I can put both 80GB IDE drives in the poweredge for 80+80+80+40 type storage. Won't be able to use the CD drive, though, as it only has one IDE bus. Eventually I'll get a 500GB sata when the prices go under $60, which seems to be soon.
The sun ultra5 is just something lando was getting rid of, and I offered to take off his hands. It's got a 400MHz ultrasparc processor, 768MB RAM (huge RAM, so huge the floppy drive doesn't fit in it) a 60GB IDE hard drive, and a generic IDE CD drive. Not sure what I'm going to do with it, but I have a keyboard and mouse so I can potentially use it as a full on workstation, probably with netbsd or sol.
Right now I'm installing OS9 on my powerbook pismo that I liberated from hannah and pondering food. The poweredge looks like it's almost done copying the first flood of data. Sweet.
Tuesday, April 15, 2008
Finally took ACL exam
so after like... four classes of only going over the INTRO exam we decided that before we forgot everything there was to know about access control lists we might as well go ahead and take the freaking exam, it is the last one of the bunch, so now we just have to focus on the final(s) and reviewing for the INTRO.
I also learned something interesting about that: If I get an 80% or higher on the final, and then take and pass the voucher exam (more or less another final) I get $25 off the exam price ($100.) Also, if I pass the exam, the community college will give me $50 just for doing it, because they're so hard pressed to get some CCNA graduates. So $25 is pretty reasonable, eh?
I also learned something interesting about that: If I get an 80% or higher on the final, and then take and pass the voucher exam (more or less another final) I get $25 off the exam price ($100.) Also, if I pass the exam, the community college will give me $50 just for doing it, because they're so hard pressed to get some CCNA graduates. So $25 is pretty reasonable, eh?
Saturday, April 12, 2008
Sleepy Saturday Morning
Well I just now got up, very tired and kinda cold, pondering going back to sleep. I was hoping today I might be able to go to the fleamarket and get that little old monitor that guy had for sale; I'm almost certain that it's cga monitors aren't that small. Oh well, maybe I can go when mom gets up around 9/10.
yeah... going back to sleep definitely sounds good....
Subscribe to:
Posts (Atom)